D-Link

Setting up D-Link Routers with UnblockAll

Important: Before you start

Before you get on changing your DNS settings in order to use UnblockAll, make sure to write down on a piece of paper, the current serves addresses. It's highly important for you to keep these numbers safe, for backup needs, in cse you want or need to get back to them at any time.

We also advise you to print this page, in case you have problems and need to take a look on the instructions available.

Instructions

1. Open your router administration page by clicking visiting either one of these websites: 192.168.0.1 or 192.168.1.1.

2. Enter your username and password if you have one. Default user name is ADMIN, default password is either PASSWORD or leave it empty.

3. Click on Manual Internet Connection Setup button at the bottom or WAN on the left.

4. Make sure none of these are enabled;

o DNS Relay

o Advanced DNS

o mydlink

5. Fill DNS server fields with values from the table below:

Primary: 173.214.251.71

Secondary: 192.133.141.178

6. Click on Save Settings or OK button.

Important!

Give the router, computers and players you are planning to use with the service a restart

Login to our homepage, making sure to check the status of the service on the status bar in the middle.

You may want to check manufacturers web site to see if there is a firmware update, especially if you have DIR–815 with version prior to 1.01.

D-Link DIR-xxx models

Why do I need to block Public DNS Lookups?

Some services have begun using forced DNS lookups to Google and other public DNS servers that are hardcoded in the apps and devices. This effectively bypasses any DNS servers setup by you or your ISP which means Smart DNS services such as Unblockall will not work. In order for Unblockall to be able to work, your services have to use Unblockall server to resolve domain names. The only way to get around this issue is by setting up static routes or other methods to block your device from accessing Google, and other public DNS servers from supported routers.


Disclaimer: This is an advanced tutorial meant for users comfortable setting up routers. If settings get corrupt, you always have the option of resetting the router but make sure you make note of your current settings or back them up first. The instructions and commands are provided AS IS for you to try and may or may not work depending on your actual router and the features available for you.



How to Block Public DNS :

Step 1 - Login to your Router

a. Type http://192.168.0.1 into web browser address bar (also try http://192.168.1.1 or http://192.168.2.1)

b. Enter router username and password. The default username is usually admin, and default password is blank

Step 2 - Add Static Routes


a. Click on 'Manual Setup'


b. Click on 'Status' and write down your internet IP address


c. Click on 'Advanced' -> 'Routing'


d. Add the following to the Route List:


Network/Host IP: 8.8.8.8

Netmask: 255.255.255.255 or 255.255.252 or 255.255.248

Gateway: your internet IP

Interface: LAN  (If you don't see this option, click here for instructions to enable it)


Network/Host IP: 8.8.4.4

Netmask: 255.255.255.255 or 255.255.252 or 255.255.248

Gateway: your internet IP

Interface: LAN

Add the additional addresses below to the route list:

Network/Host Address: 8.8.8.8 

Subnet Mask: 255.255.255.255


Network/Host Address: 8.8.4.4

Subnet Mask: 255.255.255.255


Network/Host Address: 108.175.32.0

Subnet Mask: 255.255.240.0


Network/Host Address: 23.246.0.0

Subnet Mask: 255.255.192.0


Network/Host Address: 45.57.0.0

Subnet Mask: 255.255.128.0


Network/Host Address: 185.2.220.0

Subnet Mask: 255.255.252.0


Network/Host Address: 198.38.96.0

Subnet Mask: 255.255.224.0


Network/Host Address: 198.45.48.0

Subnet Mask: 255.255.240.0


 Network/Host Address: 64.120.128.0

Subnet Mask: 255.255.128.0

 

Network/Host Address: 64.197.128.0

Subnet Mask: 255.255.128.0

Gateway: your internet IP

Interface: LAN

e. Click on 'Save Setting'


Step 3 - Power-Cycle Devices

a. Turn off your device.

b. Unplug the power cable from the router.

c. Wait 30 seconds.

d. Plug in router.

e. Turn on your device. 

Try 7-day for Free for Unblock All content

Get full access to the Unblock All products with your free trial. No payment details needed

Start Your Free Trial